• +44 (0)1684 85 75 30
  • enquire@airmonitors.co.uk

2BTech-106 Ozone

2BTech-106 Ozone

The Model 106 series of ozone monitors comprise single beam ozone monitors similar to the Model 202 in size, weight and power consumption. The 106-L, -M,-MH and -H instruments were originally designed for industrial ozone applications. However, the lower cost 106-L ozone monitor may be used for air pollution studies as well and is installed at more than 100 stations around the world in our Global Ozone Project educational outreach program. The Model 106-L has been designated by the US EPA as a Federal Equivalent Method (FEM).  The Model 106-L was designed for manufacturability, resulting in a lower cost and more robust instrument.  In the near future, the Model 106 series will include a touchscreen as the user interface.

Measurement Principle UV Absorption at 254 nm
Measurement Interval 2 s
Data Averaging Options 10 s, 1 min, 5 min, 1 hr
Flow Rate ~1 Liter/min; Up to 20 L/min for Model 106-H
Data Storage 32,736 lines (10 s avg. = 3.7 days; 5 min avg = 113 days)
Choice of Units ppb, ppm, pphm, µg m-3, mg m-3 (for Models 106-L and 106-M)
ppm, mg m-3 (for Model 106-MH)
vol%, wt% air, wt% O2, g/m3, g/Nm3 (for Model 106-H)
Data Outputs USB, RS232, 0-2.5 V Analog, 4-20 mA, LCD Display
Power Requirements 12 V, 500 mA, 6 watt
Size 3.75 x 8.5 x 8.5 inches (9.5 x 21.6 x 21.6 cm)
Weight 4.5 lb (2.0 kg)
I want to measure Ozone [O3]
Products Gas Monitors,Portable Monitors
Applications Indoor Air Quality,Industrial Process,Occupational Exposure,Outdoor Air Quality

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: 2BTech-106 Ozone

© 2016 Air Monitors. Web design by CWS