Continuous Web System

CMS-100 WEB LOGGER
CONTINUOUS MONITORING SYSTEM

The CMS-100 System has the capability of connecting up to twenty (20) DHP-485 hydrocarbons sensors. The data transmitted from the sensors is stored both in the logger and on our propriety PetroSense Website. The CMS-100 will display alarms on the web. It also has the capacity to send alarm notices via e-mail, up to five (5) addreses

FEATURES

Continuous data collection and recording
Ethernet and GPRS Connectivity
Battery Back-up
Connect up-to 20 DHP hydrocarbon probes
Real time remote monitoring
Secure Data Network
Automatic Firmware Updates Online
Intrinsically safe probe network*
Analog (V or mA) output*
*Optional

APPLICATIONS

Process water
Waste water
Oil field produced water
Separation vessel effluent
Storm water run-off
Bilge and ballast water
Groundwater remediation monitoring
Carbon filter bed breakthrough
Heat exchanger leak detection

PERFORMANCE AND HARDWARE SPECIFICATIONS OF THE CMS-100

Below is a snapshot of our Web page displaying the graphics as well as up to 72 hours of the most recent data collected. Selecting the data you want to be displayed can customize the charts. The chart below is displaying the concentration levels in ppm for three DHP-485 hydrocarbon sensors.The new PetroSense CMS-100 Web-based Data Logger provides real time monitoring via the Web.

Data-logging capabilities real time monitoring via the Web image.

CMS-100 WEB LOGGER - HARDWARE SPECIFICATIONS

Enclosure: NEMA 4 – IP66

Dimensions: 10.04 / 255 Long - 9.84 / 250 Wide - 6.34 / 161 High

Power: Input=120/240 VAC 50/60 Htz Output=12 VDC, .5A, battery charger

Communications: Proprietary Website - Ethernet or GPRS modem

Environmental Temperature: -20C to +50C

Options: Wireless Data Transfer - Solar Powered System

Note: System requires Internet access for retrieving data.

CMS-100 WEB LOGGER CONTINUOUS MONITORING SYSTEM

FEATURES

APPLICATIONS

PERFORMANCE AND HARDWARE SPECIFICATIONS OF THE CMS-100

CMS-100 WEB LOGGER
CONTINUOUS MONITORING SYSTEM