• +44 (0)1684 85 75 30
  • enquire@airmonitors.co.uk

Environics Ambient Air Calibrators

Environics Ambient Air Calibrators

The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6100 meets all U.S. Environmental Protection Agency requirements. The Series 6100 consists of a single chassis supporting up to 3 thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration, and control electronics. The Series 6100 ozone generator is factory calibrated using a NIST traceable ozone standard. This temperature controlled, ultra-violet (UV) based ozone generator includes a precision photo-optical feedback circuit to compensate for lamp aging effects.

Accuracy
Concentration: ± 1.0% setpoint
Flow: ± 1.0% setpoint
Flow Repeatability: ± 0.05% F.S.O.

Warm up time: 30 minutes

* Performance specifications are valid when all Mass Flow Controllers are operating between 10% and 100% of full scale flow. 
Mass flow controllers are calibrated using a NIST traceable Primary Flow Standard, using a Reference Temperature of 25°C (77°F) and a Reference Pressure of 760 mm Hg (29.92 in. Hg)

Ozone Generator
Concentration Range: 0.02 - 0.5 ppm at 5 - 10 slpm
Optional Ranges: 0.05 - 1.0 ppm at 5 - 10 slpm

Accuracy: /- 2% or /- 0.003 ppm
Repeatability: /- 2% or /- 0.003 ppm (for 30 days)

Mechanical

Inlets Balance: External 1/4" Swagelok*
Span(s): External 1/4" Swagelok*

Outlet
One external 1/4" Swagelok*
*(or compatible fitting)

Operating Pressures at inlets (flow dependent)
Minimum: 20 psig (1.38 Bar)
Nominal: 25 psig (1.72 Bar)
Maximum: 30 psig (2.07 Bar)

Wetted Surfaces
Tubing: Teflon®
MFCs: Stainless Steel
Seals: Viton®
Glass Chambers: Pyrex®

Operating temperatures
32° - 122° F (0° - 50° C)

Performance Temperature Range
59° - 95° F (15° - 35° C)

Weight
Standard: 20 lbs.
Including Options: 30 lbs.

Dimensions (w x h x d)
Portable: 17" x 7" x 15"
Rack: 19" x 7" x 15"

Electrical

Voltage: 100 to 250 VAC, 50/60 Hz
Current: 2 Amps (maximum)

Operating Modes

Front panel keypad
Internal timer control
RS-232 serial data interface
I/O control (8 inputs / 8 outputs)

Data I/O

RS-232 serial data interface
I/O Control (8 inputs / 8 outputs)

OPTIONS

  • Rack Mount
  • Extra Gas Inlets
  • Solenoid Valve on Output
  • Permeation Oven
  • 3rd Mass Flow Controller
I want to measure
Products Gas Calibrators
Applications Gas Calibration & Generation

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Environics Ambient Air Calibrators

© 2016 Air Monitors. Web design by CWS