Air Monitors - Air Quality Monitoring Technology Specialists - Home Page

Portable Gas Detection

We offer a range of portable detectors for gases, volatile organic compounds and radiation.
Use the menu tabs below to see details of each range.

Literature

ToxiRae 3

The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.

Lowest cost of ownership on the market.
Rugged steel housing for harsh environments.
Fastest instrument response time on the market for better protection and worker safety.
Fastest bump station on the market with highest productivity, putting workers back to work quickly.
Compact, low-cost bump and calibration station enables the ability to put the bump capability where it is needed.

Key Features

High-performance 3-electrode pinless micro sensor with the fastest response time
0.1 ppm H2S resolution, and high-range 1999 ppm CO available
Large, easy-to-read display facilitates overview of gas concentration or days remaining (end-user adjustable)
Event logging of up to 10 events
Full activity records when used with AutoRAE Lite calibration station
Intuitive, simple-to-operate user interface
IP-67 water-proof and dust resistant
Loud, 95 dB audible alarm, bright red flashing visible LEDs and internal vibration alarm
Color-coded labels for gas type
Extended operating temperature of -4° to 140° F (-20° to +60° C) with full T4 approval
User-configurable bump/calibration reminders

Sensor Specifications

Gas	Range	Resolution
Hydrogen Sulfide (H₂S)	0-100 ppm	0.1 ppm
Carbon Monoxide (CO)	0-500 ppm	1 ppm
Carbon Monoxide (CO)	0-1999 ppm	1 ppm

Detector Specifications

Size	3.4" x 2.2" x 0.8" (8.6 cm x 5.5 cm x 2.0 cm)
Weight	3.5 oz (99.4 g)
Battery	User-replaceable 2/3 AA high-capacity lithium
Alarms	95 dB typical (at 30 cm) buzzer and flashing red LED to indicate exceeded preset limits High: Displays “High” and emits 3 beeps and flashes per second Low: Displays “Low” and emits 2 beeps and flashes per second STEL: Displays “STEL” and emits 1 beep and flash per second TWA: Displays “TWA” and emits 1 beep and flash per second Vibration alarm 6-LED visible alarm
Weight	3.5 oz (99.4 g)
Data Logging	10 events
Weight	3.5 oz (99.4 g)
Response Time	T90 < 12 seconds
IP Rating	IP-67
EMI/RFI	Highly resistant to EMI/RFI. Compliant with EMC directive 89/336/EEC
Certification	US and Canada: C1D1, Groups A, B, C, D, T4 Europe: ATEX II 1G EEx ia IIC T4 IECEX: Ex ia IIC T4
Operating Temperature	Continuous: -4° to 140° F (-20° to +60° C) Intermittent: -22° to 140° F (-30° to +60° C)
Humidity	0 to 95% relative humidity (non-condensing)
Warranty	2 years, including sensor and battery if used within specs
Calibration	Two-point calibration for zero and span

*Specifications are subject to change

ToxiRae II

The ToxiRAE II is a single gas, personal protection monitor that continuously displays toxic gas concentrations. It costs just a little more than disposable detectors. Unlike typical disposables that only display "remaining life", the ToxiRAE II is a full-featured gas monitor providing continuous, digital display of the gas concentration, STEL, TWA, and Peak values as well as high, low, TWA, and STEL alarms.

A simple to use one-button product, the ToxiRAE II is easy to calibrate. Use the pre-set alarms, or modify the alarms to meet your specific requirements. In contrast to disposables that are turned on once and remain on until their batteries expire, you decide when and where to use your ToxiRAE II and you turn it on and off accordingly.

Key Features

Large, easy-to-read continuous display of gas concentration in ppm
Displays STEL, TWA, and Peak values
Sensors available: H2S, CO, O2, NH3, Cl2, ClO2, HCN, NO, NO2, PH3, SO2
Field replaceable filter and battery
Field replaceable sensor available in Europe and Asia only
2-Year warranty
User adjustable high, low, STEL, and TWA alarms
Varying audio alarm signals for different alarm conditions
Bright red flashing alarm
Loud 90 dB buzzer
Built-in vibration alarm
Holds Peak values
Simple calibration
Durable, highly impact-resistant, carbon loaded ABS housing
Highly resistant to RFI interference
IP-65 rated weather resistant
Stainless steel corrosion resistant attachments
Small enough to be clipped onto a hard-hat, shirt pocket, shoulder-strap, or belt

Gas	Range (ppm)	Resolution (ppm)
Ammonia (NH₃)	0-50	1
Carbon Monoxide (CO)	0-500	1
Carbon Monoxide (CO)	0-1999	10
Chlorine (Cl₂)	0-10	0.1
Chlorine Dioxide (ClO₂)	0-1	0.01
Hydrogen Cyanide (HCN)	0-100	1
Hydrogen Sulfide (H₂S)	0-100	1
Nitric Oxide (NO)	0-250	1
Nitrogen Dioxide (NO₂)	0-20	0.1
Oxygen (O₂)	0-30%	0.1%
Phosphine (PH₃)	0-5	0.01
Sulfur Dioxide (SO₂)	0-20	0.1

Badge Rae

The BadgeRAE personal gas detector provides 2 years of low-cost, continuous, and maintenance-free protection from exposure to Hydrogen Sulfide (H2S) or Carbon Monoxide (CO).

The zero-maintenance BadgeRAE does not require calibration, but prudent safety procedure dictates periodic challenges with CO or H2S gas. Only the BadgeRAE provides a bump alert warning with a “Test” message on the display to remind users to “bump” the detector with gas to verify the performance of the sensor and electronics. This procedure is quick and easy and resets the “Test” message.

Key Features

Up to 2 years of continuous protection
Once activated BadgeRAE is always on and monitoring
No Maintenance (no battery replacement, sensor replacement, or calibration)
Large, easy-to-read LCD display
One-button integrity self tests, including: alarm function, alarm limits, alarm-minutes used, operational life remaining, and peak reading over 24 hours
Rugged housing made of durable, impact resistant, carbon loaded ABS that is highly resistant to RFI interference and is IP-55 rated weatherproof
Small enough to be clipped onto a hard-hat, shirt pocket, shoulder-strap, or belt
Pre-set low and high alarms
Bright LED alarm light
Loud buzzer

Multi Rae IR

The MultiRAE IR combines a PID (Photoionization Detector) and Carbon Dioxide (CO2) sensor with O2, LEL, and one specific toxic gas sensor in one compact monitor with sampling pump. The MultiRAE IR’s versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRAE IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous, operational area monitor for use in applications such as indoor air quality and industrial hygiene.

Key Features

O2, LEL, PID, CO2, and any plug-in “smart” toxic sensors: CO, H2S, SO2, NO, NO2, Cl2, HCN, NH3, PH3
0-20,000 ppm measurement of CO2 using our patented non-dispersive infrared (NDIR) sensor
0-2,000 ppm measurement of VOCs (volatile organic compounds) with 0.1 ppm resolution
Measure more chemicals than with any other PID: With over 60 Correction Factors built into the MultiRAE IR memory and the largest printed list of Correction Factors in the world (300+), RAE Systems offers the ability to accurately measure more ionizable chemicals than any other PID!
Drop-in Battery: When work schedules require putting in more than the 12 hours supplied by the advanced Lithium-ion (Li-ion) battery, the drop in alkaline pack supplied with every MultiRAE IR allows you to finish the job.
User friendly screens make it easy to use for simple applications and flexible enough for sophisticated options.
Rugged Rubber Boot: The standard rubber boot helps assure that the MultiRAE IR survives the bumps and knocks of tough field use.
Strong, built-in sample pump draws up to 100’ (30m) horizontally or vertically. Liquid trap and automatic low flow alarm protect the MultiRAE IR from damage.
Large keys are operable even with 3 layers of gloves
Easy-to-read display with backlight
Store up to 80 hours of data at one minute interval for all 5 sensors for download to PC (with the optional datalogging).
Loud audible alarm that varies for different alarm conditions and an optional external vibration alarm for noisy areas

Q Rae II

The QRAE II is available as a diffusion or pumped one-to-four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide. Key features include an easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.

Key Features

Patented SPE O2™ Oxygen sensor unique features:
- Lead-free design that complies with RoHS directive
- Extended life compared to lead-type electrochemical oxygen sensors, resulting in a low cost of ownership
- Leak-free design, minimizing downtime
Best EMI/RFI immunity technology for products in its class, eliminating radio interference
Easy access to pump, sensors, filter and battery compartment without exposing electronic components to potential damage
IP-65 water- and dust-resistant case
Strong, protective, concussion-proof design

Advantages

Plug-in sensors: oxygen, combustibles, hydrogen sulfide, carbon monoxide or sulfur dioxide
Intuitive simple-to-operate two-button user interface with built-in pump
Pump or diffusion models available
Cradle doubles as an external battery charger and data transfer connection
Rugged housing
Large graphic display for easy overview of gas type and concentration
Rechargeable Lithium-ion battery pack provides up to 14 hours of continuous operation

Sensor Specifications (Default)

Gas Monitor	Range	Resolution
Oxygen	0-30%	0.1%
Combustible	0-100% LEL	1% LEL
Carbon Monoxide	0-1000 ppm	1 ppm
Hydrogen Sulfide	0-100 ppm 0-1000 ppm	0.1 ppm 1 ppm
Sulfur Dioxide	0.1-100 ppm	0.1 ppm

*Consult RAE Systems for custom configurations

Detector Specifications

Size	5" L x 2.8" W x 2" H (12.5cm x 7.2cm x 5.0cm)
Weight	12 oz (350 g)
Sensors	Catalytic bead for combustibles Oxygen: SPE O₂™ (non-consumable Solid Polymer Electrolyte technology) Toxic: electrochemical, H₂S, CO or SO₂
Battery	Interchangeable Lithium-ion and alkaline battery packs
Operating Hours	Up to 10 hours with Lithium-ion battery, up to 8 hours with alkaline battery
Displays	4 lines, with LED automatic back light in dim light or alarm condition
Keypads	Two-key operation
Direct Readout	Instant reading of up to four sensors Oxygen as percentage by volume Combustible gas as percentage of lower explosive limit (LEL), scaleable using correction factors Toxic gases as parts per million High and low values for all gases Battery and shutdown voltage Date, time, elapsed time, temperature
Alarms	95dB buzzer (at 30 cm) and flashing red LED High: 3 beeps, vibration and flashes per second Low: 2 beeps, vibration and flashes per second STEL and TWA: 1 beep, vibration and flash per second Alarms: latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery
EM/RFI	Highly resistant to EMI/RFI. Compliant with EMC directive 2004/108/EC additional +60 volts/meter
IP Rating	IP-65
Data Logging	Standard 12 days at one-minute intervals
Calibration	Two-point calibration for zero and span
Sampling Pump	Optional, internal pump 300 cc/mn
Hazardous Area Approval	US and Canada: CI, D1, Groups A, B, C, D, T4 Europe: ATEX II 2G EEx ia d IIc T4 IECEX: Ex ia d II C T4
Temperature	-4° to 113° F (-20° to 50° C) for T4 temperature code
Humidity	0% to 95% relative humidity (non-condensing)
Attachment	Stainless-steel alligator clip
Warranty	Full 2-year warranty, including all sensors

*Specifications are subject to change

Area Rae Steel

The AreaRAE Steel is an ATEX-certified multi-gas, wireless monitor. Housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.

The photoionization detector (PID) in the AreaRAE Steel can measure parts per million of volatile organic compounds (VOCs). In addition, it can be equipped with a lower explosive limit (LEL) sensor, an oxygen sensor, and one or two electrochemical toxic sensors for measuring specific substances such as hydrogen sulfide or chlorine.

Key Features

Up to five sensors (PID, LEL, O2 and two electrochemical toxic gas)
Loud buzzer and large, extra-bright warning light
Large LCD display and keypad
Rugged, weather-resistant stainless-steel housing
Built-in sampling pump
Interchangeable Li-ion or alkaline battery pack
Continuous operation via AC source

Advantages

Real-time wireless data transmission with built-in RF modem
View real-time sensor data and alarm status at headquarters or command center
ProRAE Remote software simultaneously controls and displays readings for up to eight remote detectors
License-free, 869MHz wireless transmission with communication range up to 3km
Automatic mesh networking that allows each AreaRAE Steel to function as a repeater, greatly extending wireless range
Optional wall-mounting bracket or field-mounting tripod adapter

Sensor Specifications

Gas Monitor	Range	Resolution
Oxygen	0-30.0%	0.1%
Combustible	0-100% LEL	1% LEL
VOCs	0-199 ppm 200-2000 ppm	0.1 ppm 1 ppm
Carbon Monoxide	0-500 ppm 10-2000 ppm	1 ppm 10 ppm
Hydrogen Sulfide	0-100 ppm	1 ppm
Sulfur Dioxide	0-20.0 ppm	0.1 ppm
Nitric Oxide	0-250 ppm	1 ppm
Nitrogen Dioxide	0-20.0 ppm	0.1 ppm
Chlorine	0-10.0 ppm	0.1 ppm
Hydrogen Cyanide	0-100 ppm	1 ppm
Ammonia	0-50 ppm	1 ppm
Phosphine	0-5.0 ppm	0.1 ppm
Hydrogen Chloride	2-15 ppm	1 ppm
Hydrogen Fluoride	2-10 ppm	1 ppm

Detector Specifications

Size	9.25" L x 5.0" W x 9.25" D (235mm L x 127mm W x 235mm D) without handle
Weight	13.85 lbs (6.3 kg) with battery pack
Detector	Up to five sensors (O2, combustible, two toxic and VOC), electrochemical sensors for toxic gases and oxygen, photoionization sensor for VOC, catalytic combustion sensor for combustible gases
Battery	Rechargeable, 7.4V/4.5Ah, Lithium-ion battery pack with built-in charger (less than 10 hours charge time) or a 6 C-size alkaline battery pack
Operating Hours	36 hrs continuous stand-alone operation 24 hrs continuous wireless operation (Lithium-ion battery) 18 hrs continuous wireless operation (alkaline battery)
Displays	2-line, 16-digit LCD with manually activated LED back light
Keypads	3 operation and 4 programming keys
Direct Readout	Instantaneous values, sensor name, high and low values for all detectors, TWA and STEL values for toxic gases and VOCs, battery voltage and elapsed time
Alarm	Flashing red LED cluster to indicate exceeded preset limits, low battery or sensor failure
Alarm Setting	Separate alarm limit settings for TWA, STEL,Low and High alarm
Audible Alarm	Buzzer, 100dB buzzer at 10cm (typical)
Visual Alarm	Flashing red LED cluster
Alarm Mode	Latching/automatic reset
Data Logging	4,000 points for each sensor with time stamp, serial number, user ID, site ID
Data Storage	20,000 readings (64 hours, 5 channels at 1 minute intervals) in non-volatile memory
Datalog Interval	Programmable 1 to 3,600 sec
Communication	Upload data to PC and Download monitor setup from PC through RS-232 link to serial port on PC
EM Immunity	No effect when exposed to 0.43 mW/cm2 RF interference (5-watt transmitter at 30cm)
Safety Certification	CSA Classified for use in Class I, Division 2, Groups A, B, C, and D (w/900 MHz modem)
Frequency	902 to 928 MHz (License-free)
RF Range	Up to 2 miles (900 MHz), extendable with RAELink2 Repeaters
Error Detection	32 bit CRC, resend on error
Callibration	Two-point field calibration for fresh air and standard reference gas
Sampling Pump	Internal integrated diaphragm pump with programmable High (400cc/min) and Low (300cc/min) flow rate settings
Low Flow Alarm	Auto shutoff pump at low-flow condition
Temperature	-20° to 45° C (-4° to 113° F)
Humidity	0% to 95% relative humidity (non-condensing)
Attachment	Shoulder strap, optional tripod/wall mounting bracket
Optional	Integrated GPS receiver

*Specifications are subject to change

ChemRae

ChemRAE is the latest in state-of-the-art hand-held Chemical Warfare Agent detection and identification systems. It is RAE Systems' next generation sensor technology based on tested and proven Open Loop Ion Mobility Spectrometry (IMS) technology. The ChemRAE uses an improved Ion Mobility Cell™, which provides enhanced selectivity and sensitivity. It is designed to detect Chemical Warfare Agents (CWAs) and toxic industrial chemicals (TICs).

ChemRAE can be used as stand-alone portable monitor or integrated into an AreaRAE network by using a RAELink2 modem. Integration into an AreaRAE network allows users to add CWA detection to their existing complement of AreaRAE and RAE Systems portable gas monitors.

The ChemRAE weighs less than 2 lbs and can be powered by a rechargeable lithium-ion battery pack or AA batteries. The system has clear, simple user interface, which can be operated with just one hand. The display provides the operator with agent class, a bar graph of agent concentration and relative time-based dose. The display also shows a battery life indicator, audible alarm level, date and time.

Key Features

Industry-leading IMS technology
Wireless integration into AreaRAE networks
Dosage Measurement
Agent Identification
Adjustable Sensitivity
Light weight
Simple one-hand operation
Low life-cycle cost with no consumable components

Optional Accessories

External lithium battery charger
Alkaline battery adapter

UltraRae 3000

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector’s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Key Features

Superior Performance

Petrochemical
Proven PID technology
3-second response in VOC mode or 60 seconds in compound-specific mode
- Extended range up to 10,000 ppm (in VOC mode) with improved linearity
- Humidity compensation with built-in humidity sensor
- Automatic temperature-controlled sampling time calculation
- Detects benzene down to 50 ppb (0.05 ppm)
Unique 15-minute benzene STEL calculation with 15-minute real-time benzene-specific measurement and recording
Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
New sampling probe design provides instant tube-breakthrough visibility

Extremely Versatile

VOC mode or Benzene-Specific mode for extreme versatility
Real-time wireless data transmission with built-in Bluetooth and optional RAELink3 portable modem
Integrated RAE Systems Correction Factors list for more than 200 compounds, measuring more compounds than any other PID
Field-interchangeable battery pack is replaceable in seconds without tools

Easy to Use

Large graphic display
Multi-language support
Easy access to lamp and sensor in seconds without tools

Low Cost of Ownership

Inexpensive analysis using low-cost RAE-Sep tubes vs. gas detection tubes
Much less expensive than a portable GC, and no annual factory calibration is required

Thermo Fisher TVA1000B

The TVA1000B is the ONLY over-the-shoulder portable vapor analyzer to offer both photoionization and flame ionization detectors in a single instrument. The system is a cost effective tool for helping to meet today's requirements for a healthier and safer workplace, as well as a cleaner environment.

An optional Enhanced Probe is available which allows single hand operation. Users do not need to access the sidepack during operation. The TVA1000B is compact, so you can easily carry it anywhere and its power and fuel supplies run for eight hours on a full charge. Since safety is critical to many applications, the unit is fully certified intrinsically safe for use in Class I, Division 1, Groups A, B, C, & D.

With its dual design, on-board datalogging and multipoint calibration, the TVA1000B increases productivity, and efficiency, and provides accuracy over a broader range. You no longer need to carry a second analyzer and a clipboard. Overall monitoring time is reduced because the number of vapors detected per scan is greater and scribing time is eliminated. In addition, on-board datalogging improves the integrity of the data by eliminating transcription errors.

TVA1000B is built for fast, simple operation in real-world field conditions. A large keypad ensures straight-forward, easy operation, with or without gloves. Datalogging is activated by a thumb-switch on the hand held probe. Operations are menu-driven and displays are bright and easy to read.

FEATURES AT A GLANCE

Improved Efficiency

simultaneous photoionization and flame ionization
on-board datalogging
multipoint calibration
multiple calibration curves

Simple to Use

menu-driven operation
easy-to-read LCD displays
large keypad
datalogging thumb-switch on hand-held sample probe
automatic autoranging
diagnostics

Designed For Field Conditions

over-the-shoulder portable
8-hour portable operation time
intrinsically safe for Class I, Division 1, Groups A, B, C, & D

Optional Enhanced Probe

16 x 20 character readout
flame re-ignite
menu-driven probe operation
routing functions

MiniRae 3000

The MiniRAE 3000 is the most advanced handheld volatile organic compound (VOC) detector on the market. Its Photoionization Detector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene, to leak and HazMat detection.

The RF modem allows real-time data transmissions with a base controller located up to 500 feet (or two-miles with optional RAELink3 portable modem) away from the MiniRAE 3000 detector. A personal computer can be used as the base station for a Mini-RAE 3000 system. The standard ProRAE Remote software is capable of monitoring the input of up to 64 remotely-located monitors like MiniRAE 3000, or AreaRAE, etc.

Key Features

Proven PID technology - The patented sensor provides the following unique features:
- A 3-second response time
- Extended range up to 15,000 ppm with improved linearity
- Humidity compensation with inbuilt humidity and temperature sensors
Real-time wireless data transmission with built-in RF modem or Bluetooth.
Design for service Easy access to lamp and sensor in seconds without tools.
Big Graphic display for easy overview of gas type, Correction Factor and concentration.
Field interchangeable battery pack in second’s without tools.
Integrated Flash Light for better view in dark conditions
User friendly screens including plot view chart view
Inbuilt full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
Multilanguage support with 10 languages encoded
Rugged housing withstands use in harsh environments
- IP67 Waterproof design for easy cleaning and decontamination in water
- Strong protective removable Rubber Boot.

Advantages

View real-time sensor data and alarm status at headquarters or command Center
Automatic lamp type recognition
Duty-cycling™ lamp and sensor autocleaning technology
Tough, flexible inlet Flexi-Probe™
Large 3 keys operable with 3 layers of gloves
Strong, built-in sample pump draws up to 100 feet (30m) horizontally or vertically
Loud 95 dB audible alarm
Bright red flashing visual alarm
Interchangeable Drop-In Lithium-ion and alkaline battery packs
Charging cradle doubles as an external battery charger
Compatible with AutoRAE™ calibration station
ProRAE Remote software simultaneously controls and displays readings for up to 64 remote detectors
License free, ISM band RF transmission with communication range up to 500 feet 2 miles (with optional)
Optional RAELink III modem provides GPS capability to track and display readings from remote detectors as well as 2 miles long distance transmission
Data logging with up to 6 months of data at one-minute intervals
3-year 10.6eV lamp Warranty

Sensor Specifications

Gas Monitor	Range	Resolution	Response Time T90
VOCs	0-999.9 ppm 1000-15,000 ppm	0.1 ppm 1 ppm	< 3 s < 3 s

Detector Specifications

Size	10" L x 3.0" W x 2.5" H (25.5 cm x 7.6 cm x 6.4 cm)
Weight	26 oz (738 g)
Sensors	Photoionization sensor with standard 10.6 eV or optional 9.8 eV or 11.7 eV lamps
Battery	Rechargeable, external field-replaceable Lithium-Ion battery pack Alkaline battery adapter
Operating Hours	16 hours of operation (12 hours with alkaline battery)
Displays	4 lines, 28 x 43 mm, with LED backlight for enhanced display readability
Keypads	1 operation and 2 programming keys, 1 flashlight on/off
Direct Readout	Instantaneous reading: VOCs as ppm by volume High values STEL and TWA Battery and shutdown voltage Date, time, temperature
Alarms	95dB at 12" (30 cm) buzzer and flashing red LED to indicate exceeded preset limits: High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery and pump stall
EM/RFI	Highly resistant to EMI/RFI Compliant with EMC Directive 2004/108/EC
IP Rating	IP67 unit off and without flexible probe IP65 unit running
Data Logging	Standard 6 months at one-minute intervals
Calibration	Two-point or three-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates
Sampling Pump	Internal, integrated flow rate at 500 cc/mn Sample from 100' (30m) horizontally and vertically
Low Flow Alarm	Auto shut-off pump at low flow condition
Communications	Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth™ Wireless data transmission through built-in RF modem
Frequency	902 to 928 MHz (license-free), 2.400 to 2.4835 GHz (license-free), 433 MHz, 869 MHz
RF Range	Up to 500' (152m; 900 MHz, 433 Mhz, 869 Mhz), extendable with RAELink3 Repeater to 2 miles (3.2km)
Hazardous Area Approval	US and Canada: Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe: ATEX II 2G EEx ia IIC T4
Temperature	-4° to 113° F (-20° to 50° C)
Humidity	0% to 95% relative humidity (non-condensing)
Attachment	Durable bright yellow rubber boot
Warranty	3 years for 10.6 eV lamp, 1 year for pump, battery, sensor and instrument

*Specifications are subject to change

MiniRae Lite

The MiniRAE Lite is the most reliable hand-held volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.

Key Features

Proven PID technology: The patented sensor provides the following unique features:
- 3-second response time
- Range up to 5,000 ppm
- Humidity compensation
Designed for service - Easy access to lamp and sensor in seconds without tools
Big graphic display for easy overview of concentration
Field-interchangeable battery pack, replacable in seconds without tools
Integrated flashlight for better visibility in low light
Multi-language support with 12 languages encoded
Rugged housing withstands use in harsh environments
- IP-65 design
- Strong, protective removable rubber boot.

Advantages

Duty-cycling™ lamp and sensor auto-cleaning technology
Tough, flexible inlet Flexi-Probe™
Large keys are operable with 3 layers of gloves
Strong, built-in sample pump draws up to 100' (30m) horizontally or vertically
Loud, 95 dB audible alarm
Bright red flashing visible alarm
Interchangeable drop-in Lithium-ion and alkaline battery packs
3-year 10.6 eV lamp warranty

ppbRae 3000

The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.

The RF modem allows real-time data transmissions with a base controller located up to 500 feet (or two-miles with optional RAELink3 portable modem) away from the ppbRAE 3000 detector. A personal computer can be used as the base station for a ppbRAE 3000 system. The standard ProRAE Remote software is capable of monitoring the input of up to 64 remotely located monitors like ppbRAE 3000, or AreaRAE, etc.

Key Features

Proven PID technology - The patented sensor provides the following unique features:
- A 3-second response time
- Extended range up to 10,000 ppm with improved linearity
- Humidity compensation with inbuilt humidity and temperature sensors
Real-time wireless data transmission with built-in RF modem or Bluetooth.
Design for service Easy access to lamp and sensor in seconds without tools.
Big Graphic display for easy overview of gas type, Correction Factor and concentration.
Field interchangeable battery pack in second’s without tools.
Integrated Flash Light for better view in dark conditions
User friendly screens including plot view chart view
Inbuilt full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
Multilanguage support with 10 languages encoded
Rugged housing withstands use in harsh environments
- IP67 Waterproof design for easy cleaning and decontamination in water
- Strong protective removable Rubber Boot.

Advantages

View real-time sensor data and alarm status at headquarters or command Center
Automatic lamp type recognition
Duty-cycling™ lamp and sensor autocleaning technology
Tough, flexible inlet Flexi-Probe™
Large 3 keys operable with 3 layers of gloves
Strong, built-in sample pump draws up to 100 feet (30m) horizontally or vertically
Loud 95 dB audible alarm
Bright red flashing visual alarm
Interchangeable Drop-In Lithium-ion and alkaline battery packs
Charging cradle doubles as an external battery charger
Compatible with AutoRAE™ calibration station
ProRAE Remote software simultaneously controls and displays readings for up to 64 remote detectors
License free, ISM band RF transmission with communication range up to 500 feet 2 miles (with optional)
Optional RAELink III modem provides GPS capability to track and display readings from remote detectors as well as 2 miles long distance transmission
Data logging with up to 6 months of data at one-minute intervals
3-year 10.6eV lamp Warranty

Sensor Specifications

Gas Monitor	Range	Resolution	Response Time T90
VOCs	0-9999 ppb 10-99 ppm 100-999.9 ppm 1000-9999 ppm	1 ppb 0.01 ppm 0.1 ppm 1 ppm	< 3 s < 3 s < 3 s < 3 s

Detector Specifications

Size	10" L x 3.0" W x 2.5" H (25.5 cm x 7.6 cm x 6.4 cm)
Weight	26 oz (738 g)
Sensors	Photoionization sensor with standard 10.6 eV or optional 9.8 eV or 11.7 eV lamps
Battery	Rechargeable, external field-replaceable Lithium-Ion battery pack Alkaline battery adapter
Operating Hours	16 hours of operation (12 hours with alkaline battery)
Displays	4 lines, 28 x 43 mm, with LED backlight for enhanced display readability
Keypads	1 operation and 2 programming keys, 1 flashlight on/off
Direct Readout	Instantaneous reading: VOCs as ppm by volume High values STEL and TWA Battery and shutdown voltage Date, time, temperature
Alarms	95dB at 12" (30 cm) buzzer and flashing red LED to indicate exceeded preset limits: High: 3 beeps and flashes per second Low: 2 beeps and flashes per second STEL and TWA: 1 beep and flash per second Alarms latching with manual override or automatic reset Additional diagnostic alarm and display message for low battery and pump stall
EM/RFI	Highly resistant to EMI/RFI Compliant with EMC Directive 2004/108/EC
IP Rating	IP67 unit off and without flexible probe IP65 unit running
Data Logging	Standard 6 months at one-minute intervals
Calibration	Two-point or three-point calibration for zero and span. Calibration memory for 8 calibration gases, alarm limits, span values and calibration dates
Sampling Pump	Internal, integrated flow rate at 500 cc/mn Sample from 100' (30m) horizontally and vertically
Low Flow Alarm	Auto shut-off pump at low flow condition
Communications	Download data and upload instrument set-up from PC through charging cradle or optional Bluetooth™ Wireless data transmission through built-in RF modem
Frequency	902 to 928 MHz (license-free), 2.400 to 2.4835 GHz (license-free), 433 MHz, 869 MHz
RF Range	Up to 500' (152m; 900 MHz, 433 Mhz, 869 Mhz), extendable with RAELink3 Repeater to 2 miles (3.2km)
Hazardous Area Approval	US and Canada: Classified as Intrinsically Safe for use in Class I, Division 1 Groups A, B, C, D Europe: ATEX II 2G EEx ia IIC T4
Temperature	-4° to 113° F (-20° to 50° C)
Humidity	0% to 95% relative humidity (non-condensing)
Attachment	Durable black rubber boot
Warranty	3 years for 10.6 eV lamp, 1 year for pump, battery, sensor and instrument

*Specifications are subject to change

GammaRae IIR

The GammaRAE II R is two instruments in one: it has the rapid response of a detector and the accurate dose measurement of a dosimeter. It is designed specifically to meet the needs of first responders.

This instrument contains two separate sensors. The Cesium Iodide (CsI) scintillator provides a fast, two-second response to radiological threats, while the energy-compensated PIN diode provides high dose rate range coverage and accurate dose measurements.

GammaRAE II R alerts the wearer with a loud audible alarm, big, bright flashing LEDs, and a built-in vibration alarm. For stealth operations, users can disable each alarm individually.

Immersible (IP67) design makes for reliable operation in wet environments and easy decontamination. IS certification permits operation in potentially flammable/explosive environments.

The GammaRAE II R accumulates accurate total dose. Stored dose data can be cumulative or reset for each use period.

Key Features

Sensitive CsI scintillator for excellent search capability and fast response
Energy-compensated PIN diode sensor for high dose rate range and accurate dosimeter capabilities
Prominent visible, audible and vibration alarms
Immersible in water for easy decontamination
Top-mounted reversible display
Continuous digital readout in µR/h (µRem/h) or in µSv/h (µSieverts/h) and cps (counts per second)
Two operation keys, simple intuitive programming
Long calibration life
Two AA Alkaline batteries last up to 900 hours
Large, 30,000-point datalog capacity, downloaded via cable-free Bluetooth® connection

Applications

Alerts First Responders to radioactive threats
Accurately measures accumulated dose to the wearer
Customs & border patrols
Law enforcement
Security officers in nuclear power facilities, banks, government laboratories, medical facilities
Military
Government agencies
HazMat teams
Fire Departments

NeutronRae II

NeutronRAE II is the first personal radiation detector to provide rapid detection of both gamma (γ) ray and neutron sources even in potentially flammable environments. Certified intrinsically safe and water-immersible for chemical decontamination purposes, the NeutronRAE II can be safely used in more environments than any other personal gamma and neutron radiation detector.

The NeutronRAE II is designed for use in rough environments. It is immersible (IP67) in water for easy decontamination, and a concussion-proof case provides shock protection if the detector is dropped. The two-button operation is designed for use even in Level A protection suits with two layers of gloves.

The NeutronRAE II features fast response time for both the neutron and gamma radiation. Alarm modes can be set to operate in "Search Mode" based on local background radiation levels or "Safety Mode" providing high and low alarm levels based on absolute dose rates.

Key Features

Detects neutrons from weapons-grade Plutonium (239Pu)
Sensitive CsI and LiI scintillators for excellent search capability and fast response
Prominent visible, audible and vibration alarms
Immersible in water for easy decontamination
Top-mounted invertable display
Continuous digital readout in µR/h (µRem/h), µSv/h (µSieverts/h) and cps (counts per second) for gamma; cps (counts per second) for neutron radiation
Dust and shock resistant
Two AA Alkaline batteries last up to 600 hours
Large, 30,000-point datalog capacity, downloaded via cable-free Bluetooth® connection

Applications

Alert First Responders to radioactive threats
Customs & border patrols
Law enforcement
Security officers in nuclear power facilities, banks, government laboratories, medical facilities
Military
Government agencies
HazMat teams
Fire Departments